+49 / 89 82 99 89 10 info@stratusvision.com

STratus iii inline

An automatic inspection solution for boards

Our Stratus III Inline solution is our automatic solution to inspect rigid boards (Ceramic, PCB, etc.) in an automated conveyor based solution. This system offers maximum speed and toplight flexibility with great cost efficiency. Substrates up to a size of 10″ x 10″ can be inspected for excess paste, missing paste, smearing, narrowing, mouse bites, holes, via covering, sprayers, bleeding of paste, contamination, print shifts, substrate shrinking, screen aging, etc, and it differentiates between random and serial defects.

The materials that are inspected are usually conductor materials (like silver or silver palladium), resistor paste, cover glass, adhesives, printed or electroplated gold, etc., and our technology detects all defects that are relevant in modern fine line screen printing. With our specially designed flipping module the back side can be inspected. The tendency goes to even finer structures. On prints with less than 50 µm line widths, inspection with the human eye is not possible or very unreliable. The STRATUS VISION AOI systems can inspect a 10” x 10” substrate in less than 10 seconds and find defects between 0.2µm and 30µm (depends on pixel size). Wet (directly after screen printing) or dry surfaces can be inspected.

Designed for

[

DCB Inspection

b

PCB

b

Hybrid Ceramic

Detailed Specs

Approx. Length x Width x Height: 1485 mm x 998 mm x 2548 mm

Approx. Weight: 1100 kg

Color: RAL 9003

Welded Steel frame

Granite base

Flexible Monitor arm

Voltage: 110V AC to 240V AC

Current: 4.8 Amps to 2.2 Amps

Frequenzy: 50 to 60 Hertz

Network: Ethernet RJ45

Air: 6 bar

Air consumption: 40l / min

Camera: Areascan, Linescan and 3D

Resolution: 1µm to 15µm

Lens: Telecentric, Bicentric or 

Operating Temperature: 18.5°C +/- 8.5°C

Operating Humidity: 50% +/- 25%

Power Consumption: 0.5kW average